How to set up an electric scooter

• Allen keys (supplied)
• Pump with gauge (with a valve extension if needed)

Before you start, lay everything out on a soft surface (the flattened box works) and check it against the parts list in your manual.

• Deck with folded stem
• Handlebars and grips
• Charger
• Screws for the handlebar clamp
• Bell and reflectors

1. 1

   Step 1: Unfold the stem and lock the folding latch until it clicks; the safety catch must be engaged.

2. 2

   Step 2: Connect the handlebar cables if they are separate, then fit the handlebars and tighten the clamp screws evenly.

3. 3

   Step 3: Check that the stem does not move back and forth when you push and pull the bars.

4. 4

   Step 4: Pump the tyres to the pressure printed on them.

5. 5

   Step 5: Charge fully with the supplied charger before the first ride.

6. 6

   Step 6: Test both brakes at walking pace, then ride at the lowest speed setting to get used to the throttle.

• Riding with the folding latch not fully locked.
• Underinflated tyres, which increase the risk of punctures and falls.
• Charging with a different charger.