How to assemble a toy storage organizer
A toy organizer is a low frame of shelves that holds plastic bins, often tilted so small children can see into them. Even a low unit gets climbed, so it needs a stable build and a wall anchor, and the bins must slide in and out freely.
- Time
- about 45 min
- Difficulty
- Easy
- People
- 1 person
- Steps
- 6
Tools needed
- Cross-head screwdriver
- Allen key (supplied)
- Drill for wall anchoring
Parts to check first
Before you start, lay everything out on a soft surface (the flattened box works) and check it against the parts list in your manual.
- Two side panels
- Shelf rails or shelf panels
- Top and back panel
- Plastic bins
- Anti-tip wall fitting
Step by step
Step 1: Lay one side panel flat with the rail holes up and screw in the shelf rails, checking the tilted ones slope toward the front as the manual shows.
Step 2: Put the second side panel on top of the rails and screw them in so the frame is square.
Step 3: Add the top panel and, if included, the back panel, which stops the frame racking.
Step 4: Stand the unit against the wall where it will live and fix it to the wall with the anti-tip fitting, into a stud or with fixings for the wall type.
Step 5: Slide the bins into their rails, largest on the lowest shelves, and check each one comes out easily without catching.
Step 6: Push on the top edge from the front to make sure the anchor holds and the unit does not lean.
Common mistakes
- Skipping the wall anchor because the unit is low.
- Putting heavy toys in the top bins.
- Fitting sloped rails upside down, so the bins tip back or fall out.
Safety notes
- Anchor the unit even if it is low; children climb and pull on the bins.
- Keep screws and small fittings out of reach while you build.
This is general guidance for this type of product. Your product's own manual comes first: follow its order, fittings and torque values where they differ from this page.
Updated 2026-09-30