How to assemble a trampoline

• Spring puller tool (often supplied)
• Rubber mallet
• Work gloves
• Spirit level
• Ground anchor kit (recommended)

Before you start, lay everything out on a soft surface (the flattened box works) and check it against the parts list in your manual.

• Top ring sections and T-joints
• Leg sections (W-shaped legs)
• Jumping mat and springs
• Frame pad
• Net, poles, sleeves and fixings

1. 1

   Step 1: Choose a flat, open area with clear space all around and overhead: no fences, trees, washing lines or walls within the distance the manual gives.

2. 2

   Step 2: Lay out the ring sections in a circle and join them, fitting the T-joints where the legs attach.

3. 3

   Step 3: Fit the leg sections into the T-joints, then turn the frame the right way up with your helper.

4. 4

   Step 4: Lay the mat in the middle, with its V-rings evenly spaced. Hook on four springs at 12, 3, 6 and 9 o'clock, then work opposite pairs so the mat stays centred.

5. 5

   Step 5: Keep fitting springs in opposite pairs until all are on. Use the spring tool and keep your face away from the spring being stretched.

6. 6

   Step 6: Fit the frame pad so it covers every spring and the frame, and tie it on underneath.

7. 7

   Step 7: Fit the net poles to the legs, slide on their foam sleeves, and hang the net, closing the entrance as the manual shows.

8. 8

   Step 8: Check it is level and fit ground anchors, especially in windy areas, before anyone jumps.

• Fitting all the springs on one side first, so the last ones will not stretch far enough.
• Placing the trampoline on concrete or near a fence.
• Leaving the net entrance open or unzipped.